|
|
|
|
|
Home >
전기전자계측기/법정장비 >
LCR/임피던스 >
<< 100KHz |
|
|
|
|
|
|
|
|
|
|
|
RCL 메타
(고성능LCR 메타)
(100KHz)
|
|
|
|
|
|
|
|
| |
|
|
| |
|
|
| |
|
|
|
|
|
|
| |
|
|
■ | 주파수 범위 | 50Hz to 100 kHz | ■ | 임피던스/저항(Z ,R) | 0.0000 Ohm to 200 MOhm | ■ | 콘덴서(C) | 0.0 pF to 31.8mF | ■ | 인덕턴스(L-코일) | 0.0 uH to 637 kH | ■ | DC 테스트 모드 | 300 mV , 1V , 2V | ■ | Q | 0.002 to 1000 | ■ | D | 0.002 to 1000 | ■ | 정확도 | 0.1% (PM6304C 는 0.05%) | ■ | DC 바이어스(내부) | 2 V | ■ | DC 바이어스(외부) | 0 to 40 V | ■ | Bin 프로그램 | IEEE488 , RS-232 | ■ | 리모트 Bin 프로그램 | PM 9559B | | | |
| AC Test Mode | | Test frequency | PM 6306: 50, 60, 100, 120 Hz
200 Hz to 100 kHz (100 Hz steps)
100 kHz to 1 MHz (1 kHz steps)
PM 6304: 50, 60, 100, 120 Hz
200 Hz to 20 kHz (100 Hz steps)
100 kHz | | Test frequency accuracy | PM 6306: 0.01%
PM 6304: 0.01% | | Test signal levels | PM 6306: 50 mV to 2V (10 mV steps) via 100W
PM 6304: 50 mV via 100W
1V via 100W
2V via 400W
| | Basic measurement accuracy at normal measurement mode | PM 6306: 0.1% ± 1 digit (for ³ 0.25V, £ 50 kHz)
0.1% * (f/50 kHz) ± 1 digit (for ³ 0.25V, > 50 kHz)
0.1% * (0.25V/Vt) ± 1 digit (for < 0.25V, £ 50 kHz)
PM 6304: 0.05% ± 1 digit (for PM 6304C, £ 2 kHz)
0.1% ± 1 digit (for £ 20 kHz)
0.4% ± 1 digit (100 kHz)
0.5% ± 1 digit (for 50 mV £ 20 kHz)
2.0% ± 1 digit (for 50 mV, 100 kHz)
|
| DC bias | | Internal | PM 6306: 0 to 10V (0.1V steps)
PM 6304: 2V | | External | PM 6306: 0 to 40V
PM 6304: 0 to 40V |
| DC test mode (Optional) | | Test signal levels | PM 6306: 50 mV to 2V (10 mV steps) via 100W
PM 6304: 300 mV via 100W
1V via 100W
2V via 400W
| | Basic measurement accuracy | PM 6306: 0.1% ± 1 digit (for ³ 0.25V)
PM 6304: 0.1% ± 1 digit (for 1V) |
| Maximum measuring ranges | | Impedance/Resistance AC Z or RAC | 0.0000W to 200 MW | | Resistance DC RDC | 0.0000W to 50 MW | | Capacitance C | 0.00 pF to 31.8F | | Inductance L | 0.00 mH to 637 kH | | Quality factor Q | 0.000 to 1000 | | Dissipation factor D | 0.000 to 1000 | | Phase Angle F | -179 to + 180 deg | | Voltage monitor VX | 0.1 mV to 2.00V | | Current monitor IX | 0.005 mA to 10.0 mA |
| Maximum resolution | | Impedance/Resistance AC Z or RAC | 0.1 mW | | Resistance DC RDC | 0.1 mW | | Capacitance C | 0.01 pF | | Inductance L | 0.01 mH | | Quality factor Q | 0.001 | | Dissipation factor D | 0.001 | | Phase angle F | 0.1 deg | | Voltage monitor VX | 0.1 mV | | Current monitor IX | 0.001 mA |
| Auto Mode | | Read-out | Dominant and secondary parameter | | Equivalent circuit diagram | Parallel for R+C, Serial for R+L |
| Manual mode | | Read-out | Dominant and secondary parameter or Z, F, D, Q, VX, IX | | Equivalent circuit diagram | Parallel or serial selectable |
| Average function | | Function | Exponential averaging in continuous mode | | Levels | PM 6306: 3 (and off)
PM 6304: 1 (and off) |
| Measuring modes (Normal) | | Continuous | 2 measurements/s | | Single | Triggered via "TRIG" key
Triggered via handler interface
Triggered via IEEE-488 or RS-232
| | Test frequency | PM 6306: 50, 60, 100, 120 Hz
200 Hz to 100 kHz (100 Hz steps)
100 kHz to 1 MHz (1 kHz steps)
DC (optional)
PM 6304: 50, 60, 100, 120 Hz
200 Hz to 20 kHz (100 Hz steps)
100 kHz
DC (optional)
| | Read-out | Display or via IEEE-488 or RS-232 interface |
| Measuring Modes (Fast) | | Max. speed | 10 measurements/s | | Test frequency | PM 6306: 200 Hz to 100 kHz (200 Hz steps)
100 kHz to 1 MHz (1 kHz steps)
DC (optional)
PM 6304: 200 Hz to 20 kHz (200 Hz steps)
100 kHz
DC (optional) | | Single | Triggered via handler interface
Triggered via IEEE-488 or RS-232 | | Read-out | Via IEEE or |
| Measuring Modes (Fast) | | Max. speed | 10 measurements/s | | Test frequency | PM 6306: 200 Hz to 100 kHz (200 Hz steps)
100 kHz to 1 MHz (1 kHz steps)
DC (optional)
PM 6304: 200 Hz to 20 kHz (200 Hz steps)
100 kHz
DC (optional) | | Single | Triggered via handler interface
Triggered via IEEE-488 or RS-232 | | Read-out | Via IEEE or RS-232 interface (display blanked) |
| Binning | | Standard bins | 9 | | Special bins | Bin "0" and bin "fail" | | Bin programming via | IEEE-488 interface
RS-232 interface
Bin programmer (PM 6304 only) | | Bin limit programming | Absolute or relative |
| Trim function | | Open circuit | Open circuit compensation Z > 100 kW | | Short circuit | Short circuit compensation Z < 10W |
| Protection against charged capacitors | | C < 2 mF | PM 6306: Vmax < 200V
PM 6304: Vmax < 500V | | 2 mF o C o 2 mF | PM 6306:
Vmax < 47 x (C/mF) -0.234
(Vmax in V, C in mF)
PM 6304: Vmax. < 117 x (C/mF) -0.234
(Vmax in V, C in mF) |
| Environmental Conditions | | Operating temperature | 0° to 50° C | | Storage temperature | -40° C to 70° C | | Power requirements | 100/120/220/240V + 10% | | Line frequency | 50/60 Hz | | Power Consumption | PM 6306: 44 VA
PM 6304: 31 VA | | Safety | According to CE-regulation 73/23 EN61010-1 CAT II, Pollution Degree 2 | | EMC | According to CE regulation 89/336:
Emission according to EN 55011, Group 1 Class B, respectively CISPR 11.
Immunity according to EN 50082-1, inclusive IEC 801-2, -3, -4 | | Warm-up time | PM 6306: 30 minutes
PM 6304: 5 minutes |
| Dimensions and weight | | W x H x D | 315 x 105 x 405 mm (12.4 in x 4.13 in x 15.9 in) | | Weight | PM 6306: 5.3 kg (11.7 lb)
PM 6304: 4.7 kg (10.4 lb) |
|
|
|
 배송지역 : 전국
배송비 : 3,000입니다.(도서,산간,오지 일부지역은 배송비가 추가될 수 있습니다.)
본 상품의 평균 배송일은 4주일이내입니다.(입금 확인 후)
설치 상품의 경우 다소 늦어질수 있습니다.
[배송예정일은 주문시점(주문순서)에 따른 유동성이 발생하므로 평균 배송일과는 차이가 발생할 수 있습니다.]
배송기간 :주문일 포함 4주일이내에 상품을 받으실 수 있습니다. (연휴/공휴일 제외이며, 현금 주문일 경우 입금일 기준입니다.)
|
|
|
|
|
.jpg)
.jpg)
